Silicone Putty

What is Silicone Putty?

It is a two-part RTV silicone rubber, non-toxic material with the viscosity of putty for building easy but specific moulds. The mould will face up to temperatures up to 315°C.

This rubber does not have to have moulds or containers which liquid silicon or our RTV rubber necessitates. You just mix equivalent components of Part A and an equal amount of Section B which involves significantly less time and ability in getting ready the rubber ready for application.

Simply just set, it is the speediest, best signifies of developing a reusable mould that is flexible and exact.

Security Precautions

It is safe to use and does not give off any poisonous fumes. These who are allergic to silicone ought to however choose all the needed security precautions. For most men and women having said that there is no have to have for gloves.

Silicone putty comes in two kinds. A typical objective putty and 1 that is manufactured with foods basic safety in brain that might be applied in the manufacture of candies and other food elements.

Recommended Storage

Maintain in a neat dark storage put with the lids firmly shut. If the putty is not uncovered to air it will last for additional than a single calendar year.


Aspect A and Portion B of the silicone putty is coloured in different ways to allow you to assure even and correct mixing. Never worry about weighing each aspect. Just estimate as closely as probable an equivalent measurement ball of just about every element. Knead them alongside one another with your fingers till the colour turns into uniform and without having streaks. It is recommended to get only a moment or fewer to do this as the silicone begins curing quickly soon after mixing.

How to use Silicone Putty

When you have combined the silicone putty push it in excess of and all around the item to create the perception. Permit is established for 5 to 10 minutes. When pressing the putty above the design commence by urgent from the centre of the item and going outwards to make certain no air is trapped in the impression.

Silicone putty very easily traps air as its viscosity would not make it possible for bubbles to increase as it does with liquid silicones so be thorough.

A mould release is unneeded as silicone does not adhere to other objects, nevertheless one particular difficulty is that it can grow to be entrapped in wood fibres and grow to be hard to clear away. If the putty is pushed from a vertical floor it may well fall absent if not supported due to the quick launch attributes of the putty.

Contrary to a mould manufactured from a liquid silicone you will not complete with a stage base to facilitate casting. A person way to get all over this is to connect two wood strips to the base aspect of the putty which will act as legs on the mould.

Once the silicone putty has set it will enable you to relaxation the mould on these strips generating a level mould to forged.

As silicone putty commences to established up in as little as a few minutes immediately after you have finished kneading, you must function promptly. Increase the putty out to at minimum 1 cm on all sides of the object to supply a level surface area about the mould opening.

As silicone will adhere to silicone any slim areas can be fixed by including added putty to the completed mould.

What can the moulds be made use of for?

Silicone Putty moulds can be used at higher temperatures such as that of an oven. Hence Polymer clays can be hardened in the moulds. All sorts of resin can be applied as properly as plasters. Candies and sweets can be fashioned in the food items protected silicone putty moulds.

By Stan Alderson

More From My Blog